FOLLOW USuse-IP Facebook: https://www.facebook.com/useip/use-IP Twitter: https://twitter.com/useIPuse-IP Google+: https://plus.google.com/+Use-ipCoUk/puse
Answer: The smart managed switches don't have a web interface (you can't log into them by typing the IP address of it in a web browser). You can only add the switch to the iVMS 4200 software and do any configurations needed from there. To activate the camera. 1. Open the SADP tool on the PC to activate the camera. 2. After activation change the IP address and we have to use one of the ranges 10.1.1.xxx. Confirm with the password that was used to activate the camera. Setting NVR IP via the web interface. 1. Open the web browser and enter the IP address of the NVR with the portبرنامج sdkhttps://www.hikvision.com/ar/support/download/sdk/ل تحميل الاداة اظغط هناhttps://drive.google.com/file/d
To meet customers’ requirement for connecting analog and IP cameras in different rate, Hikvision Turbo HD DVR provide the function of disabling analog channels to expand IP channels. This document is mainly to introduce how to achieve this function. Note: 1. Different series device have different abilities of expanding IP channels.
If the NVR has PoE ports and you have a Hikvision camera running firmware 5.4.0 or earlier (ie has the 'backdoor vulnerability') you can extract the NVR password if you reset the camera to 'Inactive' and plug it in to the NVR to 'Activate' it. Check out this thread : After you have reset your camera, use a web browser or SAPD tool to set the camera up and running again. Since the default IP address is 192.0.0.64, the camera will not be active. If the camera is an older version, the password to log in should be the default 12345. Need to Reset Hikvision Camera Password? Check out the article! yfs6J0.